Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
srp gt pedals SimRacingPro GT-R V5 Pedals for SaleThe SimRacingPro GT R V5 Pedals bring a tactile transformation to your sim rig. With their pneumatic piston system, each press delivers a nuanced resistance that mirrors the feel of a real world pedal. The adjustable stroke range from 15mm to 45mm allows you to tailor the pedal travel to your driving style, whether you're feathering the throttle or stomping on the brakes. Crafted from AL6061 aluminum and finished with a 28 micron anodized layer, these
The SimRacingPro GT-R V5 Pedals bring a tactile transformation to your sim rig. With their pneumatic piston system, each press delivers a nuanced resistance that mirrors the feel of a real-world pedal. The adjustable stroke range from 15mm to 45mm allows you to tailor the pedal travel to your driving style, whether you're feathering the throttle or stomping on the brakes. Crafted from AL6061 aluminum and finished with a 28-micron anodized layer, these pedals are built to endure the rigors of intense racing sessions. The integration of SRP's MySetup software enables real-time adjustments, ensuring your pedal response is always in sync with your racing demands.
What Sets the SimRacingPro GT-R V5 Pedals apart?
- Innovative Pneumatic Resistance Unlike traditional spring-based systems, the GT-R V5 employs a pneumatic mechanism that compresses air to generate resistance. This design provides a smooth and consistent pedal feel, enhancing control during braking and acceleration. The absence of mechanical springs reduces wear and tear, contributing to the longevity of the pedals.
- Comprehensive Customization via SRP MySetup The SRP MySetup software offers an extensive suite of customization options. Users can adjust pedal curves, dead zones, and brake pressure in real-time, even during a race. The ability to save multiple profiles allows for quick switching between different setups, catering to various vehicles and track conditions.
- Robust Construction and Materials The pedals are constructed from precision-machined AL6061 aluminum, known for its strength and lightweight properties. The use of SKF needle bearings ensures smooth pedal movement, while the ceramic diaphragm transducers provide accurate signal transmission. This combination of materials and components results in a durable and reliable pedal set.
- Modular Design for Versatile Configurations The fully modular design of the GT-R V5 allows users to configure the pedals to their preference. Whether you prefer a two-pedal or three-pedal setup, or need to adjust the spacing and angle, the modularity accommodates various ergonomic requirements. This flexibility ensures compatibility with a wide range of sim racing cockpits.
Pros and Cons
| Pros | Cons |
|---|---|
| Adjustable stroke range enhances customization | Requires a rigid cockpit for optimal performance |
| Real-time adjustments via SRP MySetup software | Higher price point compared to entry-level pedals |
| Durable construction with premium materials | Complex setup may be challenging for beginners |
Specifications
| Specification | Value |
|---|---|
| Material | AL6061 aluminum, 28-micron anodized finish |
| Bearings | SKF needle roller bearings |
| Pistons | Pneumatic with stainless steel body and NBR seal |
| Transducers | Ceramic diaphragm, SRP-T1 and SRP-T3 |
| Stroke Adjustment | 15mm to 45mm |
| Connectivity | USB-C (compatible with USB 2.0 and 3.0) |
| Resolution | 65536 steps |
| Software | SRP MySetup |
SimRacingPro GT-R V5 Pedals Compatibility
The SimRacingPro GT-R V5 Pedals are designed for compatibility with a range of sim racing setups. They connect via USB-C, ensuring high data transfer rates and minimal latency. The pedals are compatible with PC platforms, and with the use of a DriveHub adapter, they can also be used with PlayStation and Xbox consoles. It's important to note that for console compatibility, the use of original PlayStation USB-C cables is recommended to maintain connection stability.
These pedals are best suited for installation on a rigid cockpit to ensure stability and performance. Installation on wheel stands without a solid connection between the pedals and seat is not recommended, as it may compromise the functionality and feel of the pedals.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 1006 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc.
They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places.
But they wqould work especially well if you were not constantly moving them as we do.
They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
★★★★★ 4
Easy to put together , decent quality
Color: Black, Size: Wheel-6 Panel
Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
★★★★★ 5
Nice and sturdy
Color: Grey, Size: Wheel-8 Panel
Good privacy wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026